|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PHAP33 series Tact switches Distinctive features and specifications Wide range of case formats SMT and through-hole models Normally closed models available Models Performances Current/voltage rating Contact resistance Insulation resistance Dielectric strength Electrical life (cycles) Operating force Travel Operating temperature Storage temperature Vibrations IR reflow soldering Wave soldering Manual soldering PHAP3381 PHAP3382 PHAP3383 PHAP3384 PHAP3390 PHAP3391 PHAP3371 PHAP3372 PHAP3373 PHAP3374 PHAP3378 PHAP3355 PHAP3361 PHAP3362 PHAP3363 PHAP3365 PHAP3366 PHAP3301 PHAP3302 PHAP3303 PHAP3305 PHAP3306 PHAP3307 PHAP3308 PHAP3368 PHAP3350 PHAP3351 PHAP3352 PHAP3353 PHAP3320 PHAP3321 C 50mA 12VDC 100 m max. 100 M min. 250 VAC min. (1 minute) 70.000 1,6N 0,5N 0,20/ 0,25 mm 75.000 1,6N +0,5/-0,3N 0,25 mm 30.000 1,8N 0,5N 0,25 mm 100.000 1,6N 0,5N 0,25 mm 100.000 2N 0,3N 0,50 mm 100.000 1,6N 0,5N 0,30 mm -20C to +70C -30C to +80C 10-500 Hz / 10 g 240C for 20 seconds max. 255C for 5 seconds max. 300C for 3 seconds max. - Dimensions : First dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : 1.000 pieces and multiples, except for tape and reel packaging (see following pages). APEM www.apem.com C-3 PHAP33 series SMT tact switches Microminiature and ultra-low profile - 4,2 x 4,2 mm case * Ultra-compact size for board space saving : 4,2 x 4,2 mm case, 1,5 mm button height from PCB * Reflow solderable * With or without positioning pins * For tape and reel packaging, add "R" at the end of model number. With positioning pins O0.70 (.028DIA) 0.60 (.024) 1.40 (.055) C Model number PHAP3390 4.20 (.165) o0.80 (.031 DIA) O2.00 (.079DIA) 1 3 2.60 (.102) 6.00 (.236) 1.50 (.059) 1.10 (.043) 3.50 (.137) 4.40 (.173) 1 4.80 (.188) 2 Operating force : 2,6N 0,5N - Travel : 0,20 mm 3 4 Without positioning pins 4.20 (.165) 3.80 (.150) 2.60 (.102) 2 4 1.10 (.043) 4.80 (.188) O2.00 (.079DIA) 7.00 (.276) 1 3 Model number PHAP3391 1.50 (.059) 6.00 (.236) 0.50 (.020) 2 4 3.50 (.137) 4.40 (.173) 1 Operating force : 2,6N 0,5N - Travel : 0,20 mm PACKAGING ETIQUETTE LABEL (LABEL) 14.00 (.551) 3 4.00 (.157) 2.00 (.079) To order a product with tape and reel packaging, add "R" at the end of its model number. Example : PHAP3390R. Quantity per reel : 3.400 pieces O13.00 (.512 DIA) O1.50 (.059 DIA) 5.50 (.217) 3.80 (.150) 0.50 (.020) 2 4 O330.00 (13.00 DIA) 2.00 (.079) 2.50 (.098) 2.00 (.079) 1.75 (.069) 8.00 (.315) C-4 www.apem.com APEM 12.00 (.472) 7.00 (.276) 2.80 (.110) PHAP33 series SMT tact switches Ultra-low profile - 6 x 6 mm case * Ultra-compact size for board space saving : 6 x 6 mm case, 1,6 mm button height from PCB * Reflow solderable * Types for iron soldering (L = 10 mm) * With positioning pins * With or without grounding tab for protection against electrostatic discharges * For tape and reel packaging, add "R" at the end of model number. Without grounding tab 6.00 (.236) O1.30 (.051 DIA) 4.50 (.177) 4.50 (.177) 0.70 (.028) O3.00 (.118 DIA) 4.70 (.185) 1 3 1.60 (.063) 10.40 (.409) 1.60 (.063) C 4.70 (.185) PHAP3381 PHAP3382 8 mm 10 mm 0.30 (.012) 6.00 (.236) Model No Dim. L L 2.30 (.091) 6.60 (.260) O1.50 (.059 DIA) 2 4 1.40 (.055) 2 1 3 4 Operating force : 1,6N 0,5N - Travel : 0,25 mm With grounding tab O1.30 (.051 DIA) 1.60 (.063) 6.00 (.236) 4.50 (.177) 0.70 (.028) 4.70 (.185) O3.00 (.118 DIA) 4.50 (.177) 153 1.60 (.063) 2 4 1.40 (.055) 2 1 3 5 4 O1.50 (.059 DIA) 7.50 (.295) 16.00 (.630) 10.40 (.409) 4.70 (.185) Model No PHAP3383 PHAP3384 Dim. L 8 mm 10 mm 0.30 (.012) 6.00 (.236) L 2.30 (.091) 6.60 (.260) O1.50 (.059 DIA) Operating force : 1,6N 0,5N - Travel : 0,25 mm PACKAGING ETIQUETTE LABEL (LABEL) To order a product with tape and reel packaging, add "R" at the end of its model number. Example : PHAP3383R. Quantity per reel : 2.200 pieces O13.00 (.512 DIA) 18.00 (.709) 4.00 (.157) 2.00 (.079) O330.00 (13.00 DIA) 2.00 (.079) 3.00 (.118) 1.75 (.069) 12.00 (.472) APEM www.apem.com C-5 PHAP33 series SMT tact switches Low profile - 6,2 x 6,2 mm case * Ultra-compact size for board space saving : 6,2 x 6,2 mm case, 2,6 to 3,4 mm button height from PCB * Reflow solderable * With or without grounding tab for protection against electrostatic discharges * Models with external terminals type G or internal terminals type J * For tape and reel packaging, add "R" at the end of model number. External terminals type G (gullwing) L 6.20 (.244) O3.00 (.118 DIA) 9.00 (.354) 6.20 (.244) 12.00 (.433) 4.00 (.157) 2 4 5.80 (.228) 1 3 1.00 (.039) 1 2 3 4 2 6.80 (.268) 6.20 (.244) 4 1 3 1.00 (.039) 1 3 O1.50 (.059 DIA) 7.50 (.295) 12.00 (.472) 2.80 (.110) 2 4 C Model No PHAP3371 PHAP3371A Dim. L 2,6 mm 3,4 mm 2.60 (.102) 4.00 (.157) 0.70 (.028) Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm Internal terminals type J - tape and reel packaging L 6.20 (.244) O3.00 (.118 DIA) 4.00 (.157) Model No PHAP3372R PHAP3372AR Dim. L 2,6 mm 3,4 mm 2.60 (.102) 0.70 (.028) 4.00 (.157) Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm PACKAGING ETIQUETTE LABEL (LABEL) O13.00 (.512 DIA) 18.00 (.709) 4.00 (.157) 2.00 (.079) Quantity per reel : 1.600 pieces O330.00 (13.00 DIA) 2.00 (.079) 3.70 (.146) C-6 www.apem.com APEM 16.00 (.630) To order a product with tape and reel packaging, add "R" at the end of its model number. Example : PHAP3371R. 1.75 (.069) 8.80 (.315) PHAP33 series SMT tact switches Low profile - 6,2 x 6,2 mm case Button height from PCB : 2,9 mm 2.60 (.102) 6.20 (.244) O3.00 (.118 DIA) 8.00 (.315) 6.20 (.244) 1.40 (.055) 2 1.60 (.063) 4 3 1 2 4 2.50 (.098) Model No PHAP3373 2.90 (.114) 0.70 (.028) 4.50 (.177) 4.50 (.177) Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm Button height from PCB : 3,1 mm - with grounding tab 6.20 (.244) 2.60 (.102) 0.70 (.028) O3.00 (.118 DIA) 254 6.20 (.244) 9.50 (.374) 4.50 (.177) 8.40 (.331) 1 3 C 1.60 (.063) Model No PHAP3374 Dim. L 8 mm 3.10 (.122) L 0.70 (.028) 4.50 (.177) 1 3 1 2 3 5 4 Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm PACKAGING ETIQUETTE LABEL (LABEL) O13.00 (.512 DIA) 18.00 (.709) 4.00 (.157) 2.00 (.079) Quantity per reel : 1.700 pieces O330.00 (13.00 DIA) 2.00 (.079) 4.10 (.161) 12.00 (.472) APEM www.apem.com C-7 16.00 (.630) To order a product with tape and reel packaging, add "R" at the end of its model number. Example : PHAP3373R. O1.50 (.059 DIA) 1.75 (.069) 7.50 (.295) PHAP33 series SMT tact switches Normally closed - 7,6 x 7,6 mm case * Compact size for board space saving : 7,6 x 7,6 mm case, 4,3 mm button height from PCB * Reflow solderable * Standard PCB layout Normally closed O3.00 (.118DIA) 1.00 (.039) 3 0.70 (.028) 4.50 (.177) 9.50 (.374) 7.60 (.299) C Model No PHAP3378R 10.00 (.393) 4 3.50 (.137) 1.20 (.043) 1 2 4.50 (.177) 1 2 3 4 O1.50 (.059 DIA) 4.30 (.169) 7.60 (.299) Operating force : 1,6N 0,5N - Travel : 0,25 mm PACKAGING LABEL O13.00 (.512 DIA) 18.00 (.709) 4.00 (.157) 2.00 (.079) 1.75 (.069) O330.00 (13.00 DIA) 2.00 (.079) 4.60 (.181) 12.00 (.472) C-8 www.apem.com APEM 16.00 (.630) Quantity per reel : 1.000 pieces 7.50 (.295) PHAP33 series SMT tact switches Microminiature - 6 x 3,5 mm case * Ultra-compact size for board space saving : 6 x 3,5 mm case, 4,3 or 5 mm button height from PCB * Right angle version available Vertical mounting 0.30 (.012) 3.50 (.138) 1 9.00 (.354) 6.00 (.236) 1.00 (.039) 13.20 (.520) 3.35 (.132) 0.40 (.016) C 2.00 (.098) Model No PHAP3361 PHAP3361A Dim. L 4,3 mm 5,0 mm 3.00 (.118) 3.50 (.138) L 1.50 (.059) 1.00 (.039) 2 1 2 For tape and reel packaging, add "R" at the end of model number. Operating force : 1,8N 0,5N - Travel : 0,25 mm Horizontal mounting 2.50 (.098) 3.50 (.138) 0.60 (.024) 0.60 (.024) 4 5.30 (.209) 2 4 16.00 (.629) 0.80 (.034) 1.75 (.069) 1.27 (.050) 3.00 (.118) 1.50 (.059) 3.30 (.130) 0.90 (.035) 1 3 0.60 (.024) 4.20 (.165) 3.40 (.133) 0.25 (.010) 2 Model No PHAP3355R 1.45 (.057) 6.90 (.272) 1 7.80 (.307) 3 Operating force : 1,8N 0,5N - Travel : 0,25 mm PACKAGING O1.50 (.059 DIA) 18.00 (.709) LABEL O13.00 (.512 DIA) 2.00 (.079) 4.00 (.157) Quantity per reel : PHAP3361R : 1.800 pieces PHAP3361AR : 1.800 pieces PHAP3355R : 2.000 pieces O330.00 (13.00 DIA) 2.00 (.079) 3.60 (.141) 1.75 (.069) 8.00 (.314) APEM www.apem.com 7.50 (.295) C-9 PHAP33 series SMT tact switches Microminiature - Low profile - 6,1 x 3,7 mm case * Ultra-compact size for board space saving : 6,1 x 3,7 mm case, 2,5 mm button height from PCB * Available with flat or bent terminals Flat terminals 2.60 (..102) C Model No PHAP3365R 2.50 (.098) 5.50 (.217) 3.70 (.146) 1.20 (.047) 1 6.10 (.240) 9.30 (.366) 6.30 (.248) 8.00 (.314) 2 0.60 (.024) 1.40 (.055) 1 2 Operating force : 1,8N 0,5N - Travel : 0,25 mm Bent terminals 3.70 (.146) 2.60 (.102) 2.50 (.098) 5.50 (.217) Model No PHAP3366R 1 6.80 (.267) 6.10 (.240) 8.00 (.314) 2 1.40 (.055) 0.60 (.024) 4.00 (.157) 2 1.20 (.047) 1 Operating force : 1,8N 0,5N - Travel : 0,25 mm PACKAGING 4.00 (.157) 18.00 (.709) 2.00 (.079) LABEL O13.00 (.512 DIA) O1.50 (.059 DIA) O330.00 (13.00 DIA) 2.00 (.079) 2.80 (.110) 8.00 (.314) C-10 www.apem.com APEM 16.00 (.630) Quantity per reel : 3.000 pieces 1.75 (.069) 7.50 (.295) PHAP33 series SMT tact switches 6 x 6 mm case * 4,3 to 13 mm button height from PCB * Excellent tactile feedback (snap dome) * Standard PCB layout * Caps for model with square actuator O4.50 (.177 DIA) 5.50 (.217) 4.00 (.157 SQ) 5.50 (.217) Cap colours : 1 : blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7 : ivory 2.80 (.110) 2.80 (.110) U5520 square U5530 round Round actuator 4.50 (.177) Model No PHAP3368 PHAP3368A PHAP3368B PHAP3368C PHAP3368D PHAP3368E PHAP3368F Dim. L 4,3 mm 5,0 mm 9,5 mm 8,0 mm 13,0 mm 7,3 mm 8,5 mm Actuator colour black/white 9.00 (.354) 0.70 (.027) L O3.50 (.137 DIA) 4.50 (.177) 6.00 (.236) black white black ivory grey 1 6.00 (.236) 0.40 (.016) 3 1.40 (.055) 3.50 (.137) 1 2 3 4 Operating force : 1,6N 0,5N - Travel : 0,25 mm Square actuator 0.70 (.027) 4.50 (.177) 2.40 (.094) 7.40 (.291) 4.50 (.177) 1.60 (.063) 2 4 9.00 (.354) Model No PHAP3368T 9.00 (.354) 6.00 (.236) 1 2.40 (.094) 6.00 (.236) 0.40 (.016) 3 1.40 (.055) 3.60 (.142) 1 2 3 4 Operating force : 1,6N 0,5N - Travel : 0,25 mm 0.30 MAXI (.012 MAXI) Edge of PCB mounting 4.50 (.177) O3.50 (.137 DIA) 1 2 4 0.30 (.012) Model No PHAP3305ASR 1.90 (.074) 4.40 (.173) 1.00 (.039) 4.00 (.157) 3 0.70 (.027) 4.50 (.177) 3.40 (.133) 14.00 (.551) 7.00 (.275) 1.20 (.047) 1 3 2 4 3.20 (.126) Operating force : 1,6N 0,5N - Travel : 0,25 mm Quantity per reel : 650 pieces 12.00 (.472) 7.40 (.291) 6.40 (.252) 0.80 (.034) O2.30 (.090 DIA) APEM www.apem.com 4.40 (.173) 4.50 (.177) 9.00 (.354) black/white 1.60 (.063) 2 4 C C-11 PHAP33 series Through-hole tact switches Microminiature - 6 x 3,5 mm case * Ultra-compact size for board space saving : 6 x 3,5 mm case, 4,3 or 5 mm button height from PCB * Crimped terminals for direct mounting onto PCB * Moulded-in terminals for wave soldering Straight terminals 6.00 (.236) 3.00 (.118) 3.50 (.138) 1.50 (.059) 0.30 (.012) C Model No PHAP3362 PHAP3362A Dim. L 4,3 mm 5,0 mm 2.80 (.110) 0.70 (.028) 1 6.50 (.256) 2 2 O1.00 (.039 DIA) O1.25 (.049 DIA) 1.00 (.039) 7.90 (.311) 1 Operating force : 1,8N 0,5N - Travel : 0,25 mm Horizontal mounting 1.50 (.059) 2.50 (.098) 1.45 (.057) 7.00 (.276) PHAP3363 3.72 (.146) 2.50 (.098) 0.50 (.020) 5.00 (.197) 7.00 (.276) 4 0.30 (.012) O1.30 (.051 DIA) 5.00 (.197) 2 4 Model No 0.30 (.012) 1.00 (.039) 2.50 (.098) 4.30 (.169) 5.90 (.232) 3.50 (.138) 6.50 (.256) 1.80 (.071) 3.50 (.138) 0.30 (.012) L 2.50 (.098) 3 1 2 1 3 Operating force : 1,8N 0,5N - Travel : 0,25 mm C-12 www.apem.com APEM PHAP33 series Through-hole tact switches 6 x 6 mm case * 4,3 to 13 mm button height from PCB * Excellent tactile feedback (snap dome) * Crimped terminals for direct mounting onto PCB * With or without grounding tab for protection ag. electrostatic discharges * Moulded-in terminals for wave soldering * Caps for model with square actuator (L = 2,4 mm) : 4.00 (.157 SQ) 5.50 (.217) O4.50 (.177 DIA) 5.50 (.217) Cap colours : 1 : blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7 : ivory 2.80 (.110) 2.80 (.110) U5520 square U5530 round Straight terminals Model No PHAP3301 PHAP3301A PHAP3301B PHAP3301C PHAP3301D PHAP3301E PHAP3301F Dim. L 4,3 mm 5,0 mm 9,5 mm 8,0 mm 13,0 mm 7,3 mm 8,5 mm Actuator colour black black black white black ivory grey 4.50 (.177) L O3.50 (.137 DIA) 0.70 (.027) 3.50 (.137) 4.50 (.177) 2 4 6.50 (.255) C 6.50 (.255) 0.30 (.011) 6.00 (.236) 6.00 (.236) 1.80 (.070) 3.60 (.141) 0.50 (.019) 1 3 O1.00 (.039 DIA) 2 1 3 4 Operating force : 1,6N 0,5N - Travel : 0,25 mm Straight terminals - with grounding tab Model No PHAP3302 PHAP3302A PHAP3302B PHAP3302C PHAP3302D PHAP3302E Dim. L 4,3 mm 5,0 mm 9,5 mm 8,0 mm 13,0 mm 7,3 mm Actuator colour black 6.00 (.236) 0.70 (.027) 6.35 (.250) 4.50 (.177) 0.30 (.011) L O3.50 (.137 DIA) 3.50 (.137) 6.35 (.250) 4.50 (.177) 2 4 5 0.50 (.019) 1 6.50 (.255) 2 4 2 4 == 1.50 (.059) white black ivory 6.00 (.236) 0.70 (.027) black 6.50 (.255) black 1.80 (.070) 3.60 (.141) 3 O1.00 (.039 DIA) 1 3 Operating force : 1,6N 0,5N - Travel : 0,25 mm 5 Straight terminals - square actuator 4.50 (.177) 0.70 (.027) 7.50 3.50 (.137) (.295) 2 6.50 (.255) 0.30 (.011) 6.00 (.236) L 4.50 (.177) 4 6.50 (.255) 1 3 O1.00 (.039 DIA) 1 3 Model No PHAP3303 PHAP3303A Dim. L 2,4mm 2,8 mm Actuator colour blue black 6.00 (.236) 1.80 (.070) 3.60 (.141) 0.50 (.019) Operating force : 1,6N 0,5N - Travel : 0,25 mm APEM www.apem.com C-13 PHAP33 series Through-hole tact switches 6 x 6 mm case Horizontal mounting PHAP3305 PHAP3305A PHAP3305B PHAP3305C PHAP3305D PHAP3305E PHAP3305T 3,15 mm 3,85 mm 8,35 mm 6,85 mm 11,85 mm 6,15 mm 6,15 mm black black white black ivory blue 2.4 x 2.4 4.20 (.165) O3.50 (.137 DIA) Model No Dim. L Actuator colour black 7.40 (.291) 2.50 (.098) 3 4.50 (.177) 7.00 (.275) 4 O1.00 (.039 DIA) 1 3.50 7.20 (.137) (.283) 2 0.30 (.011) 1.80 (.070) 0.70 (.027) 4.50 (.177) 7.00 (.275) 1.00 0.40 (.015) (.039) 2.50 (.098) L 1 3 2 4 Operating force : 1,6N 0,5N - Travel : 0,25 mm Horizontal mounting of 2 tact switches 5.60 (.220) 8.40 (.331) 4.50 (.177) 3.00 (.118) O1.30 (.051 DIA) C Model No PHAP3306 PHAP3306A PHAP3306B PHAP3306C PHAP3306D PHAP3306E Dim. L 3,15 mm 3,85 mm 8,35 mm 6,85 mm 11,85 mm 6,15 mm Actuator colour 22.60 (.890) 12.50 (.492) black black black white black ivory 1 2 3 4 2.00 (.079) 8.00 (.315) 6.10 (.240) 0.30 (.012) L 7.50 (.295) 10.55 (.415) 1.00 (.039) 0.40 (.016) 0.60 (.024) 6.00 (.236) 8.00 (.315) 2.00 (.079) O0.80 (.031 DIA) 1 2 4 3 Operating force : 1,6N 0,5N - Travel : 0,25 mm Long straight terminals + tape Model No PHAP3307 PHAP3307A PHAP3307G Dim. L 4,3 mm 5,0 mm 7,0 mm 18.00 (.709) 9.00 (.354) 5.00 (.197) O4.00 (.157 DIA) 0.50 (.020) 0.70 (.028) 0.50 (.020) 12.70 (.500) O3.50 (.138 DIA) 3.60 (.142) 18.00 (.709) 2.60 (.102) 0.30 (.012) 6.10 (.240) 1 O1.00 (.039 DIA) L 6.10 (.240) 2 6.35 (.250) 1 2 Operating force : 1,6N 0,5N - Travel : 0,25 mm Quantity per tape : 1.000 pieces 12.70 (.500) Straight terminals + LED O0.80 (.031 DIA) 6.40 (.252) 2.50 (.098) 4.50 (.177) 1 6.50 (.256) 0.40 (.016) 3.60 (.142) 1.20 (.047) 4.10 (.161) 5 2 2.00 (.079) 6.20 (.244) 4 6 3 Model No PHAP3308 PHAP3308R PHAP3308G PHAP3308Y LED colour LED If red green yellow 15mA 30mA 30mA LED Vf 2,1V 2,2V 2V 0.20 (.008) 4.20 5.80 (.165) (.228) 2.40 (.094) 0.40 (.016) 6.50 (.256) 7.20 (.283) 2.70 (.106) 1.50 (.059) O1.00 (.039 DIA) 1 2 0.18 (.007) 4.50 (.177) 6.20 (.244) 0.70 (.028) 3 5 5.00 (.197) 4 6 Operating force : 1,6N 0,5N - Travel : 0,25 mm C-14 www.apem.com APEM 6.00 (.236) PHAP33 series Through-hole tact switches Sealed - 7,2 x 7,2 mm or 10 x 10 mm case * Dust and splash proof * Crimped terminals for direct mounting onto PCB * With or without grounding tab for protection against electrostatic discharges * Moulded-in terminals for wave soldering 7,2 x 7,2 mm case - straight terminals - grounding or not Grounding PHAP3350 PHAP3350A PHAP3350B Non grounding PHAP3351 PHAP3351A PHAP3351B Operating force : 2N 0,3N - Travel : 0,50 mm Dim. L 5,0 mm 9,0 mm 13,0 mm Dim. L 5,0 mm 9,0 mm 13,0 mm 3 5 4 1.00 (.039) O3.00 (.118 DIA) 2.60 (.102) 0.70 (.027) 15 7.20 (.283) 2 5.00 (.197) 1 2 3 4 7.90 (.311) 7.20 (.283) 7.90 (.311) L 3.90 (.154) 5.00 (.197) 7,2 x 7,2 mm case - right angle terminals 5.60 (.220) 3.50 (.138) 4.00 (.157) 8.00 (.315) 2.50 (.098) 4 3 Model No PHAP3352 PHAP3352A PHAP3352B Dim. L 4,35 mm 8,35 mm 12,35 mm O3.00 (.118 DIA) 9.10 (.358) 8.00 (.315) 7.60 (.299) C 7.80 (.307) 0.60 (.024) L 2.50 (.098) 3.00 (.118) 3.50 (.138) 5.00 (.197) 7.80 (.307) 8.90 (.350) O1.10 (.043 DIA) O1.00 (.039 DIA) 1 3 Operating force : 2N 0,3N - Travel : 0,50 mm 10 x 10 mm case - straight terminals 2 10.00 (.394) 8.00 (.315) 3.50 (.138) 13.00 (.512) 4 10.30 (.406) 1 3 6.00 (.236) O1.00 (.039 DIA) 1 1 3 10.00 (.394) 2 4 O3.80 (.150 DIA) 3 4 2 Model No PHAP3353 6.00 (.236) 0.70 (.028) 10.30 (.406) 11.70 (.461) 1.80 (.071) 0.30 (.012) Operating force : 1,6N 0,5N - Travel : 0,50 mm APEM www.apem.com 10.00 (.394) 5.00 (.197) 2 4 2 1 C-15 PHAP33 series Through-hole tact switches 12 x 12 mm case * 4,3 to 12 mm button height from PCB * Excellent tactile feedback (snap-dome) * Crimped terminals for direct mounting onto PCB * Moulded-in terminals for wave soldering * Caps for model PHAP3321 : 4.00 (.157) 5.70 (.224) 2.00 (.079) O11.50 (.453 DIA) Cap colours : 1 : blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7 : ivory R=1.00 (R.039) 1.50 (.059) 12.00 (.472) 12.00 (.472) R=1.00 (R.039) 1.50 (.059) O13.00 (.512 DIA) U5540 square U5550 round Straight terminals - short actuator 4.00 (.157) C 12.50 (.491) 3.50 (.138) 0.3 1.00 X (.039) (.012) 5.00 (.197) 1 12.50 (.491) 3 14.10 (.555) 12.00 (.472) Model No PHAP3320 PHAP3320A Dim. L 4,3 mm 7,5 mm O6.70 (.263 DIA) 4x 2 4 3 1.20 (.047) L 1.80 (.071) 5.00 (.197) 12.00 (.472) 1 2 4 Operating force : 1,6N 0,5N - Travel : 0,30 mm Straight terminals - long keyed actuator 12.00 (.472) 8.00 (.315) 3.50 (.138) 1.20 (.047) 0.3 1.00 X (.039) (.012) 1 6.00 (.236) 12.50 (.491) 5.00 (.197) 3 12.50 (.491) PHAP3320B 14.10 (.555) 12.00 (.472) Model No 0.30 (.012) 1.00 (.039) 4.00 (.157) 1.80 (.071) 5.00 (.197) 12.00 (.472) O4.00 (.157 DIA) 4x 2 1 4 3 1.20 (.047) 2 4 Operating force : 1,6N 0,5N - Travel : 0,30 mm Straight terminals - square actuator 4.00 (.157) 3.80 (.150) 3.50 (.138) 0.3 1.00 X (.039) (.012) 1 12.50 (.491) 5.00 (.197) 3 12.50 (.491) 14.10 (.555) Model No PHAP3321 1.80 (.071) 7.30 (.287) 12.00 (.472) 4x 2 4 3 1.20 (.047) 1.80 (.071) 5.00 (.197) 12.00 (.472) 1 2 4 Operating force : 1,6N 0,5N - Travel : 0,30 mm C-16 www.apem.com APEM |
Price & Availability of PHAP3301 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |